A trap catches what's already inside; a sealed gap is what stops the next one from moving in — our Enderlin, ND crew does both in one visit. Beyond droppings and noise, chewed insulation and wiring are real risks we flag on every inspection. Thoroughness on the sealing side matters as much as the trapping itself for a lasting result.
Sealing a quarter-inch gap takes different training than setting a trap, and that's specifically what our technicians do.
Fresh droppings or attic noise get bumped up the schedule — an active population doesn't wait for a convenient Tuesday.
Inspection sets one number covering both trap placement and exclusion work — no separate invoice for each.
Snap traps, one-way exclusion doors, thermal imaging for nest zones, and sanitation gear for the cleanup after. We also photograph every sealed entry point before and after, so you have documentation of the exclusion work done.
Norway rats burrow at grade, so we work the foundation perimeter and deck footings, not just the attic.
Attic access almost always traces back to a roofline or eave gap, which is where sealing starts.
Mice need only a quarter-inch opening, so we check utility penetrations and door sweeps closely.
Cleanup follows industry biohazard handling standards, not a quick vacuum and call it done.
Hardware cloth, sweeps, and vent screens go in to physically block re-entry — not a temporary patch.
Recurring service for multi-unit properties comes with a written check-in schedule, not an occasional drive-by. We also check attic access panels and garage door seals, since those are common secondary entry points during follow-ups.
A quick description of the noise and location shapes which trap and sealing materials we bring.
We come prepared to trap and seal together, not schedule a separate trip for materials.
We trace droppings and gnaw marks back to the entry point and map every gap that needs sealing.
Traps go out, gaps get sealed, and we schedule a follow-up check to confirm the population's cleared.
Months of store-bought traps got us nowhere. Technician found the actual gap under our deck ledger in twenty minutes.
Roof rats in the attic for weeks. Three roofline gaps sealed and the noise stopped within days.
We manage six buildings — they service all of them on a schedule and send logs I can hand to ownership.
Appreciated them explaining rat versus mouse signs before quoting anything. Didn't feel like a guessing game.
Two units in our building had chewed wiring behind the stove. Exclusion work solved it and our electrician confirmed no further risk.
Coverage includes Enderlin and the surrounding region, weighted toward the property types that see the most rodent pressure. Properties near open fields or construction sites in Enderlin tend to see rodent pressure spike seasonally, which shapes our routing. A documented history of past sealing work helps the next technician quickly rule out already-addressed entry points.
Gnaw-mark size and dropping shape usually settle it, and the technician confirms on inspection. A full inspection covers roofline and chimney access alongside the foundation, since rodents use whichever gap is easiest.
Exclusion is the permanent piece; trapping without it just resets the clock. We'd rather take the extra time to seal every gap properly than leave one open and get a callback in a few months.
Dry sweeping can release airborne particles, so it's safer to leave cleanup to the visit.
Most homes wrap in one visit for trapping and sealing, with a follow-up a week or two out to confirm.
We lean on traps and exclusion before rodenticide in most residential jobs.
Pet food left out and gaps around utility lines are frequent culprits we flag on inspection. It's worth checking your attic access panel periodically, since that's a common secondary entry point we find at follow-ups.
Trapping and sealing in the same visit beats a cycle of traps that never quite finish the job.
Call +1-844-564-2570